New Portable primary crushing plant
consisting of :
New Gator 22"x36" single toggle, overhead eccentric,
roller bearing,
greased lubrication, stress relieved frame, heavy duty roller
bearings,
hydraulic adjustment, reversible manganese jaw dies
100 HP TEFC electric motor, sheave, v-belts, 460v/3phase/60hz
with
driven sheave, v-belts, adjustable motor base, belt guard.
New Gator 38" x16' vibrating grizzly feeder with 10' of
pan and 6' of adjustable grizzly
bars. Heavy duty design with replaceable wear liners in floor
and side
walls of feeder. Oil bath lubrication vibrating mechanism with
SKF
roller bearings, matched, cut, helical gears, shatter proof
site glass.
20HP TEFC 460v/3phase/60hz electric motor, sheave, v-belts,
pivoted
motor base,. Heavy duty coil springs. By pass chute under grizzly
section for fines.
Heavy duty receiving hopper of 19' long x 8'6" fabricated
out of
1/2" mild steel with heavy duty upright support columns.
Unit is bolted
on and removeable for ease of shipping and or maintenance.
36" under crusher front discharge conveyor with lagged
head pulley,
winged tail pulley, pillow block bearings, gear reducer, 10HP
TEFC
460v/3phase/60hz electric motor, sheaves, v-belts, belt guard.
2-ply belting with belt splice, sealed for life idlers. Under
crusher discharge area fully skirted to prevent spillage.
Access ladder to operator's area, handrail, knee board, toe
plate.
Mounted on heavy duty tandem axle, chassis
with 11:00x22.5 wheels and tires. Heavy duty blocking stands,
fifth wheel towing, signal lights, mudflaps, unit is primed
and painted.
New Gator 3' Standard Cone Crusher
100HP TEFC electric motor with sheave, v-belts, adjustable motor
base.
460v/3phase/60hz
36" undercrusher side discharge conveyor with lagged head
pulley,
winged tail pulley, discharge chute fully skirted to prevent
spillage,
2-ply belting, 7.5HP TEFC electric motor, gear reducer, sheaves,
v-belts,
belt guard, sealed for life idlers.
New Gator Model
5'x16' 3-deck incline screen, 1/4" side plate thickness,
1/4" AR feed box liners, 1/4" AR discharge lip liners,
25 HP TEFC electric motor. Discharge chutes for each
deck of the screen.
Includes optional spray bars installed on 2nd and 3rd deck of
screen
All above is mounted on a heavy duty tandem axle chassis with
air brakes,
signal lights, access ladder, belt guards,
mud flaps. Unit is equipped with fifth wheel kingpin. Unit is
equipped with
heavy duty blocking stands. Unit is primed and painted.
One (1) new 30"x60' top truss frame stacking conveyor with
lagged head pulley
winged tail pulley, 10HP TEFC electric motor, sheave, v-belts,
skirted receiving
hopper, 2-ply belting, leg supports, primed and painted.
Four (4) new 24"x 60' channel frame stacking conveyor with
lagged head pulley
winged tail pulley, 7.5HP TEFC electric motor, sheave, v-belts,
skirted receiving
hopper, 2-ply belting, leg supports, primed and painted.
New electrical starter package: soft start for 100 HP and 100
HP
across line starter for all additional motors, 460v/3phase/60hz
mounted in Nema dust proof, water proof, enclosures, with
on/off push buttons. Customer is responsible
for wiring starters to the motors and to the power supply
New Gator 36"x25' Single Screw Sandwasher w/ hopper and
legs.
With 15hp motor, sheave and bushing. |
Total
price -
Delivered to the
Port of Miami, FL…
SOLD
Can build new
plant in about
6-8 weeks
upon order.
|
